|
Neonatal Resuscitation Unit
Model: NRU1001 A / B
A mobile unit with attached baby cradle. With facility of Warming, Oxygenation, Suction & Intubation.
Warming
Temp. Controller
To provide thermal
regulation with highest degree of accuracy, User friendly feather touch
control along with safety alarms and cutoffs.
Heater Box
Swiveling (To
facilitate X-ray), Made up of highly insulated Molded HIP cover along
with Ceramic heater, reflector and Spot light
Baby Tray
With Acrylic
collapsible side panels, Head Up/ Down Facility, Thick foam mattress,
X-ray cassette tray, Facility to incorporate under Surface Phototherapy
etc.
Attachment
Lower Shelves or 3
Drawer Storage Cabinets, Side Mounted Monitor tray, Pole for Syringe
Pump / Infusion Pump & S.S. IV Stand.
Oxygenation
Oxygen regulator
with Hose pipe, Place to keep Cylinder, Flow meter, Humidifier bottle,
Silicone Patient Tubing, Manual Silicone Resuscitator 250ml with 00
& 01 size mask, Round shape Polycarbonate O2 Hood.
Suction
Electrically operated low pressure Suction unit with 2 Autoclavable 500 ml suction jar, Regulator and silicone tubing.
Intubation
Laryngoscope with size o & 1 Straight Blades, Silicone Airways 000, 00 & 0
Specification
Heater Box
- Consists of Ceramic Infra Red Heater 650 Watts.
- The source box can be swiveled to take X-ray
- Due to temp. insulated cover on the heater box, its exterior surface remains cool even after long run
- The construction of the stainless steel reflector and guard rail is such that the complete cleaning of
heater & reflector is possible without any electrical shock hazards
Halogen Examination Lamp (12 Volts, 50 Watts)
To provide accurate assessment of Infant Colour and sufficient illumination during procedures
Baby Tray (Stainless Steel)
- Clear acrylic collapsible side panels to assess an infant from all sides
- Stainless steel baby tray with transparent slot to incorporate the facility of undersurface phototherapy
- Acrylic tray and cushion mattress with head up/down facility
- Acrylic X-ray tray with X-ray guide for positioning the cassette
- The design aspects also allow easy of dismantling baby care area during cleaning or fumigation
Essential Attachments
- Lower Shelves
- Side Mounted Monitor tray, Pole for Syringe Pump / Infusion Pump & S.S. IV Stand
Micro Computer Temperature Controller For Model A
SKIN /
AIR MANUAL Micro Computer Controller
-
Control Modes
-
Skin control
-
air control
-
manual control
- Range of temp.
For skin control: 34 to 38°C
- Range of temp.
For air control: Room temp. to 39°
- Resolution
0.1°C
- Accuracy
± 0.2°C within set temp.
- Display
- bright skin & Air temp.( 7 segment led )
-
% of heater output ( bar graph )
-
LCD
- Control
modes
- Set Temp.
display
- Timer / APGAR Timer Baby attending alarm
- Manual Mode
- Time
programmable
- Heater
output settable
- Over
temp. Cutoff.
-
Auto audio alarm mute, mute time programmable
-
Safety Alarms Messages on LCD
-
Skin Mode
-
Skin
high 0.5° C
- low
0.5° C
-
under
range (<34° C)
- over
range (>38° C)
- Air Mode
- Air
high 1.5° C
-
low
3.0° C
-
over
range
- Heater Failure
- Power control failure
- Probe & Power failure alarm
Skin / Manual Micro Computer Temperature Controller For Model - B
-
Control Modes
-
Skin control
- manual control
-
Range
Skin control: 34 to 38°C -
Resolution
0.1°C -
Accuracy
± 0.2°C within set temp. -
Display
- 1
bright skin ( 7 segment led )
- % of
heater output ( bar graph )
-
Timer / APGAR Timer -
Manual Mode
- Time programmable
- Heater
output settable
- Over temp.
Cutoff.
-
Auto audio alarm mute, mute time programmable -
Safety Alarms
-
Skin Mode
-
Skin
high 0.5° C
- low
0.5° C
-
under
range (<34° C)
- over
range (>38° C)
- Heater Failure
- Power control failure
- Probe & Power failure alarm
Optional Attachments
- Mechanical CPAP
- Flow controlled Electronic CPAP
- Flow controlled Electronic CPAP with FiO2 Monitor.
|
